The good news is that we have updated the latest version of 200-301 dumps (Contains the latest exam questions) to better help you pass the Cisco CCNA 200-301 exam.
The CCNA 200-301 certification ensures that students have the basic technical knowledge to start a career as a network engineer in the core network field. And in the enterprise network, with sufficient skills to adapt to the changes in the new generation of technology. Cisco 200-301 dumps cover a wide range of basic knowledge to help you prepare.
With the newly adjusted latest Cisco 200-301 dumps, Pass4itsure provides you with real test preparation materials (200-301 exam questions and 200-301 PDF) and preferential prices.
Which IPv6 address block forwards packets to a multicast address rather than a unicast address?
A. 2000::/3
B. FC00::/7
C. FE80::/10
D. FF00::/12
Correct Answer: D
New Question 2 of 15:
Which two QoS tools provide congestion management? (Choose two.)
A. CBWFQ
B. FRTS
C. CAR
D. PBR
E. PQ
Correct Answer: AE
New Question 3 of 15:
Refer to the exhibit.
The MAC address table is shown in its entirety. The Ethernet frame that is shown arrives at the switch.
What two operations will the switch perform when it receives this frame? (Choose two.)
A. The switch will not forward a frame with this destination MAC address.
B. The frame will be forwarded out of all the ports on the switch.
C. The MAC address of ffff.ffff.ffff will be added to the MAC address table.
D. The frame will be forwarded out of all the active switch ports except for port fa0/0.
E. The MAC address of 0000.00aa.AAAA will be added to the MAC Address Table.
F. The frame will be forwarded out of fa0/0 and fa0/1 only.
Correct Answer: DE
New Question 4 of 15:
An engineer must configure an OSPF neighbor relationship between router R1 and R3 The authentication configuration has been configured and the connecting interfaces are in the same 192.168 1.0/30 sublet. What are the next two steps to complete the configuration? (Choose two.)
A. configure the hello and dead timers to match on both sides
B. configure the same process ID for the router OSPF process
C. configure the same router ID on both routing processes
D. Configure the interfaces as OSPF active on both sides.
E. configure both interfaces with the same area ID
Correct Answer: AE
New Question 5 of 15:
Which two statements are true about the command ip route 172.16.3.0 255.255.255.0 192.168.2.4? (Choose two.)
A. It establishes a static route to the 172.16.3.0 network.
B. It establishes a static route to the 192.168.2.0 network.
C. It configures the router to send any traffic for an unknown destination to the 172.16.3.0 network.
D. It configures the router to send any traffic for an unknown destination out of the interface with the address 192.168.2.4.
E. It uses the default administrative distance.
F. It is a route that would be used last if other routes to the same destination exist.
Correct Answer: AE
New Question 6 of 15:
Which two capabilities of Cisco DNA Center make it more extensible? (Choose two.)
A. REST APIs that allow for external applications to interact natively with Cisco DNA Center
B. adapters that support all families of Cisco IOS Software
C. SDKs that support interaction with third-party network equipment
D. modular design that is upgradeable as needed
E. customized versions for small, medium, and large enterprises
Correct Answer: AC
Cisco DNA Center offers 360-degree extensibility through four distinct types of platform capabilities:
1. Intent-based APIs leverage the controller and enable business and IT applications to deliver intent to the network and to reap network analytics and insights for IT and business innovation.
2. Process adapters, built on integration APIs, allow integration with other IT and network systems to streamline IT operations and processes.
3. Domain adapters, built on integration APIs, allow integration with other infrastructure domains such as data center, WAN, and security to deliver a consistent intent-based infrastructure across the entire IT environment.
4. SDKs allow management to be extended to third-party vendors \’s network devices to offer support for diverse environments.
Which WPA3 enhancement protects against hackers viewing traffic on the Wi-Fi network?
A. SAE encryption
B. TKIP encryption
C. scrambled encryption key
D. AES encryption
Correct Answer: A
New Question 8 of 15:
In software-defined architecture, which place handles switching for traffic through a Cisco router?
A. Control
B. Management
C. Data
D. application
Correct Answer: C
Data plane-Handles all the data traffic. The basic functionality of a Cisco NX-OS device is to forward packets from one interface to another. The packets that are not meant for the switch itself are called transit packets. These packets are handled by the data plane
New Question 9 of 15:
Which statement about LLDP is true?
A. It is a Cisco proprietary protocol.
B. It is configured in global configuration mode.
C. The LLDP update frequency is a fixed value.
D. It runs over the transport layer.
Correct Answer: B
New Question 10 of 15:
Why does a switch flood a frame to all ports?
A. The frame has zero destination MAC addresses.
B. The source MAC address of the frame is unknown
C. The source and destination MAC addresses of the frame are the same
D. The destination MAC address of the frame is unknown.
Correct Answer: D
New Question 11 of 15:
Which protocol is used for secure remote CLI access?
A. HTTPS
B. HTTP
C. Telnet
D. SSH
Correct Answer: D
New Question 12 of 15:
Where is the interface between the control plane and data plane within the software-defined architecture?
A. control layer and the infrastructure layer
B. application layer and the infrastructure layer
C. control layer and the application layer
D. application layer and the management layer
Correct Answer: A
New Question 13 of 15:
What is the role of wireless controllers in an enterprise network?
A. centralize the management of access points in an enterprise network
B. support standalone or controller-based architectures
C. serve as the first line of defense in an enterprise network
D. provide secure user logins to devices on the network.
Correct Answer: A
New Question 14 of 15:
DRAG DROP
Drag and drop the functions of AAA supporting protocols from the left onto the protocols on the right.
Select and Place:
Correct Answer:
New Question 15 of 15:
What is a characteristic of cloud-based network topology?
A. wireless connections provide the sole access method to services
B. onsite network services are provided with physical Layer 2 and Layer 3 components
C. services are provided by a public, private, or hybrid deployment
D. physical workstations are configured to share resources
Correct Answer: C
P.S
The most efficient and reliable Cisco CCNA 200-301 exam questions, 200-301 dumps, are shared above. Pass4itsure ’s Cisco CCNA 200-301 dumps can help millions of people prepare and prove their skills when trying to implement the “Implementing and Administering Cisco Solutions (CCNA) (Include Newest Simulation Labs)” exam. Join now at https://www.pass4itsure.com/200-301.html to get more of the most reliable Cisco CCNA 200-301 dumps materials.
Microsoft Azure AZ-305 training material is important for those who want to pass the AZ-305 exam. The Pass4itSure AZ-305 exam dumps have just been updated with AZ-305 training material and are the best choice for passing the Designing Microsoft Azure Infrastructure Solutions exam.
New updated AZ-305 exam dumps address https://www.pass4itsure.com/az-305.html New training material with 248 exam practice questions to help you prepare for the Microsoft AZ-305 exam.
Can you briefly describe the Microsoft Azure AZ-305 exam?
The full name of the Azure AZ-305 exam is Microsoft Certified – Azure Solutions Architect Expert. It is an exam that costs $165. Requires candidates to answer 40-60 questions in 120 minutes to reach a 700-point pass and earn Microsoft Certified: Azure Solutions Architect Expert certification.
Note that there is a prerequisite here that you need to pass the AZ-104 exam.
How do I easily pass the Microsoft AZ-305 exam?
Knowing the basics of the AZ-305 exam, I guess you will ask how to pass the Microsoft AZ-305 exam.
You will need a Pass4itSure AZ-305 exam dumps to provide you with valid training materials to help you prepare for the AZ-305 exam.
After getting the AZ-305 exam dumps, practice as many exam questions as possible to achieve proficiency.
Did you know where to offer free Designing Microsoft Azure Infrastructure Solutions exam questions?
Work2you.org blog, that’s right here. Not only that, but you can also get the Microsoft series of exam questions here, welcome to search.
Microsoft actual free training material AZ-305 exam Q&As
Q1.
You are designing a solution that will include containerized applications running in an Azure Kubernetes Service (AKS) cluster. You need to recommend a load-balancing solution for HTTPS traffic. The solution must meet the following requirements:
Automatically configure load balancing rules as the applications are deployed to the cluster. Support Azure Web Application Firewall (WAF). Support cookie-based affinity. Support URL routing.
What should you include in the recommendation?
A. an NGINX ingress controller B. Application Gateway Ingress Controller (AGIC) C. an HTTP application routing ingress controller D. the Kubernetes load balancer service
Correct Answer: B
Much like the most popular Kubernetes Ingress Controllers, the Application Gateway Ingress Controller provides several features, leveraging Azure\\’s native Application Gateway L7 load balancer. To name a few: URL routing Cookie-based affinity Secure Sockets Layer (SSL) termination End-to-end SSL Support for the public, private, and hybrid websites Integrated support of Azure web application firewall Application Gateway redirection support isn\\’t limited to HTTP to HTTPS redirection alone.
This is a generic redirection mechanism, so you can redirect from and to any port, you define using rules. It also supports redirection to an external site as well.
You plan to migrate data to Azure. The IT department at your company identifies the following requirements:
Microsoft AZ-305 The storage must support 1 PB of data. The data must be stored in blob storage. The storage must support three levels of subfolders. The storage must support access control lists (ACLs). You need to meet the requirements. What should you use?
A. a premium storage account that is configured for block blobs B. a general purpose v2 storage account that has hierarchical namespace enabled C. a premium storage account that is configured for page blobs D. a premium storage account that is configured for files shares and supports large file shares
Correct Answer: B
Microsoft recommends that you use a GPv2 storage account for most scenarios. It supports up to 5 PB, and blob storage including Data Lake storage.
Note: A key mechanism that allows Azure Data Lake Storage Gen2 to provide file system performance at object storage scale and prices is the addition of a hierarchical namespace. This allows the collection of objects/files within an account to be organized into a hierarchy of directories and nested subdirectories in the same way that the file system on your computer is organized. With a hierarchical namespace enabled, a storage account becomes capable of providing the scalability and cost-effectiveness of object storage, with file system semantics that is familiar to analytics engines and frameworks.
You architect a solution that calculates 3D geometry from height-map data. You have the following requirements:
Perform calculations in Azure. Each node must communicate data to every other node. Maximize the number of nodes to calculate multiple scenes as fast as possible. Require the least amount of effort to implement. You need to recommend a solution.
Which two actions should you recommend? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Create a render farm that uses Azure Batch. B. Enable parallel file systems on Azure. C. Enable parallel task execution on compute nodes. D. Create a render farm that uses virtual machine (VM) scale sets. E. Create a render farm that uses virtual machines (VMs).
Correct Answer: AC
Q4.
You have an Azure subscription. You need to deploy an Azure Kubernetes Service (AKS) solution that will use Windows Server 2019 nodes. The solution must meet the following requirements:
1. Minimize the time it takes to provision compute resources during scale-out operations. 2. Support autoscaling of Windows Server containers. Which scaling option should you recommend?
A. horizontal pod autoscaler B. Kubernetes version 1.20.2 or newer C. cluster autoscaler D. Virtual nodes E. with Virtual Kubelet ACI
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear on the review screen. Your company has deployed several virtual machines (VMs) on-premises and to Azure. Azure ExpressRoute has been deployed and configured for on-premises to Azure connectivity.
Several VMs are exhibiting network connectivity issues. You need to analyze the network traffic to determine whether packets are being allowed or denied to the VMs. Solution: Install and configure the Microsoft Monitoring Agent and the Dependency Agent on all VMs. Use the Wire Data solution in Azure Monitor to analyze the network traffic. Does the solution meet the goal?
A. Yes B. No
Correct Answer: B
Instead, use Azure Network Watcher to run IP flow verification to analyze the network traffic. Note: Wire Data looks at network data at the application level, not down at the TCP transport layer. The solution doesn\\’t look at individual ACKs and SYNs.
You have an Azure web app that runs in a Premium App Service plan. Developers plan to update the app weekly. You need to ensure that the app can be twitched from the current version to the new version. The solution must meet the following requirements
1. Provide the developers with the ability to test the app m Azure prior to switching versions Testing must use the same app instance 2. Ensure that the app version can be rolled back. 3. Minimize downtime.
What should you do?
A. Create a deployment slot. B. Add an instance of the app to the scale set C. Copy the App Service plan. D. Create an Azure Active Directory (Azure AD) enterprise application
Correct Answer: A
Azure Functions deployment slots allow your function app to run different instances called “slots”. Slots are different environments exposed via a publicly available endpoint. One app instance is always mapped to the production slot, and you can swap instances assigned to a slot on demand.
There are a number of advantages to using deployment slots. The following scenarios describe common uses for slots:
Different environments for different purposes: Using different slots gives you the opportunity to differentiate app instances before swapping to production or a staging slot. Easy fallbacks: After a swap with production, the slot with a previously staged app now has the previous production app. If the changes swapped into the production slot aren\\’t as you expect, you can immediately reverse the swap to get your “last known good instance” back.
You migrate App1 to Azure. You need to ensure that the data storage for App1 meets the security and compliance requirement. What should you do?
A. Create an access policy for the blob B. Modify the access level of the blob service. C. Implement Azure resource locks. D. Create Azure RBAC assignments.
Correct Answer: C
Scenario: Once App1 is migrated to Azure, you must ensure that new data can be written to the app, and the modification of new and existing data is prevented for a period of three years. As an administrator, you can lock a subscription, resource group, or resource to prevent other users in your organization from accidentally deleting or modifying critical resources. The lock overrides any permissions the user might have.
You plan to move a web application named App1 from an on-premises data center to Azure. App1 depends on a custom COM component that is installed on the host server. You need to recommend a solution to host App1 in Azure. The solution must meet the following requirements:
1. App1 must be available to users if an Azure data center becomes unavailable. 2. Costs must be minimized.
What should you include in the recommendation?
A. In two Azure regions, deploy a load balancer and a virtual machine scale set. B. In two Azure regions, deploy a Traffic Manager profile and a web app. C. In two Azure regions, deploy a load balancer and a web app. D. Deploy a load balancer and a virtual machine scale set across two availability zones.
https://docs.microsoft.com/en-us/dotnet/azure/migration/app-service “Azure App Service with Windows Containers If your app cannot be migrated directly to App Service, consider App Service using Windows Containers, which enables usage of the GAC, COM components, MSIs, and full access to .NET FX APIs, DirectX, and more.”
Q9.
You are designing a large Azure environment that will contain many subscriptions. You plan to use Azure Policy as part of a governance solution. To which three scopes can you assign Azure Policy definitions? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.
A. management groups B. subscriptions C. Azure Active Directory (Azure AD) tenants D. resource groups E. Azure Active Directory (Azure AD) administrative units F. compute resources
Correct Answer: ABD
Azure Policy evaluates resources in Azure by comparing the properties of those resources to business rules. Once your business rules have been formed, the policy definition or initiative is assigned to any scope of resources that Azure supports, such as management groups, subscriptions, resource groups, or individual resources.
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear on the review screen. You need to deploy resources to host a stateless web app in an Azure subscription. The solution must meet the following requirements:
1. Provide access to the full .NET framework. 2. Provide redundancy if an Azure region fails. 3. Grant administrators access to the operating system to install custom application dependencies.
Solution: You deploy two Azure virtual machines to two Azure regions, and you create a Traffic Manager profile. Does this meet the goal?
A. Yes B. No
Correct Answer: A
Azure Traffic Manager is a DNS-based traffic load balancer that enables you to distribute traffic optimally to services across global Azure regions while providing high availability and responsiveness.
You deploy two instances of an Azure web app. One instance is in the East US Azure region and the other instance is in the West US Azure region. The web app uses Azure Blob storage to deliver large files to end users. You need to recommend a solution for delivering the files to the users. The solution must meet the following requirements:
Ensure that the users receive files from the same region as the web app that they access. Ensure that the files only need to be updated once. Minimize costs. What should you include in the recommendation?
A. Azure File Sync B. Distributed File System (DFS) C. read-access geo-redundant storage (RA-GRS) D. geo-redundant storage (GRS)
Correct Answer: C
Q12.
You have 500 Azure web apps in the same Azure region. The apps use a premium Azure Key vault for authentication. A developer reports that some authentication requests are being throttled. You need 10 recommend a solution to increase the available throughput of the key vault the solution must minimize costs. What should you recommend?
A. Increase me number of key vaults in the subscription B. Configure geo-replication. C. Change the pacing tier. D. Configure load balancing for the apps.
Correct Answer: C
Q13.
You have an Active Directory forest named contoso.com. You install and configure AD Connect to use password hash synchronization as the single sign-on(SSO) method. Staging mode is enabled. You review the synchronization results and discover that the Synchronization Service Manager does not display any sync jobs. You need to ensure that the synchronization completes successfully. What should you do?
A. From Azure PowerShell, run Start-AdSyncSycnCycle policy type Initial. B. Run Azure AD Connect and set the SSO method to Pass-through Authentication. C. From Synchronization Service Manager, run a full import. D. Run Azure AD Connect and disable staging mode.
Correct Answer: D
In staging mode, the server is active for import and synchronization, but it does not run any exports. A server in staging mode is not running password sync or password writeback, even if you selected these features during installation. When you disable staging mode, the server starts exporting, enables password sync, and enables password writeback.
Pass4itSure AZ-305 exam dumps the latest updated training material contains 248 exam questions and answers and fixes previous bugs, please download AZ-305 exam dumps: https://www.pass4itsure.com/az-305.html
Microsoft Power Platform Solution Architect exam material is valid in preparation. We’ve updated the PL-600 exam dumps, which is what you want for the Microsoft PL-600 exam materials, to help you prepare well for the exam.
Going to the PL-600 exam dumps page is the first step you need to do >> https://www.pass4itsure.com/pl-600.html you’ll get the preparation materials for the Microsoft Power Platform Solution Architect exam that will help you pass.
PL-600: What is the exam for Microsoft Power Platform Solution Architect?
There will be 40-60 questions in the Microsoft PL-600 exam the exam will be conducted in English, and participants will need to answer the questions within 120 minutes. A score of 700 points is a pass. The Microsoft PL-600 exam will be charged a $165 fee.
The certification associated with the PL-600 exam is Microsoft Certified: Power Platform Solution Architect Expert.
Useful PL-600 Exam Resources
Architect solutions for Dynamics 365 and Microsoft Power Platform
Solution Architect: Design Microsoft Power Platform solutions
How do I become a Power Platform Solution Architect Expert?
Complete a prerequisite
Take an exam
Get Certified
See the flowchart below, you will understand.
Note! Two exams are mentioned here: Exam PL-200 Microsoft Power Platform Functional Consultant, and Exam PL-400 Microsoft Power Platform Developer you need to complete.
Want to prepare efficiently for the Microsoft Power Platform Solution Architect exam?
You’ll need updated PL-600 exam dumps help, which you can get on the Pass4itSure website, which will provide you with the latest Microsoft Power Platform Solution Architect exam materials to help you prepare for your studies efficiently.
The following two points are the main reasons for choosing Pass4itSure PL-600 exam dumps preparation materials.
1. Pass4itSure focuses on regular updates.
Regular updates make our Microsoft PL-600 exercises more effective and results-oriented.
2. Diverse choices
To meet everyone’s different learning needs, we provide Microsoft Power Platform Solution Architect exam preparation materials in the form of PDFs and software exercises.
Microsoft PL-600 free dumps [just released] real exam questions and answers
QUESTION 1
You are designing a self-service portal for a company. The portal must meet the following requirements: 1. Customers must be able to submit and review cases. 2. Customers must be able to chat with service representatives in near real-time. 3. Allow service representatives to select cases from queues and use knowledge articles to resolve customer concerns.
You need to recommend solutions for the company that does not require custom development. Which three apps or services should you recommend? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Dynamics 365 Field Service B. Dynamics 365 Customer Service C. Omnichannel for Customer Service D. Customer Insights E. Customer self-service portal
Correct Answer: BCE
B: Use Dynamics 365 Customer Service to: 1. Track customer issues through cases 2. Record all interactions related to a case 3. Share information in the knowledge base 4. Create queues and route cases to the right channels C: Omnichannel for Customer Service offers a suite of capabilities that extend the power of Dynamics 365 Customer Service Enterprise to enable organizations to instantly connect and engage with their customers across digital messaging channels.
E: Customer self-service portal: A customer self-service portal enables customers to access self-service knowledge, and support resources, view the progress of their cases, and provide feedback.
Note: Based on the selected environment in Power Apps, you can create a Dataverse starter portal or a portal in an environment containing customer engagement apps (Dynamics 365 Sales, Dynamics 365 Customer Service, Dynamics 365 Field Service, Dynamics 365 Marketing, and Dynamics 365 Project Service Automation).
A company has a Power Platform environment that connects to a third-party marketing application. The company reports that the data in the Power Platform lead table does not match data from the marketing application.
Issues include: 1. The owner data in the lead table and the third-party application do not match. 2. The Topic column has more information than the related record from the marketing application. 3. There are differences in how telephone numbers are formatted.
You need to determine which processes are causing the issues. Which three processes may be causing the differences observed? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.
A. Dataflow B. Business rule C. Classic workflow D. Power Automate cloud flow E. Duplicate detection rule
Correct Answer: ABC
A: With advanced data preparation available in Power Apps, you can create a collection of data called a dataflow, which you can then use to connect with business data from various sources, clean the data, transform it, and then load it to Microsoft Dataverse or your organization\\’s Azure Data Lake Gen2 storage account.
B: By combining conditions and actions, you can do any of the following with business rules: 1. Set column values 2. Clear column values 3. Set column requirement levels 4. Show or hide columns 5. Enable or disable columns 6. Validate data and show error messages 7. Create business recommendations based on business intelligence.
C: Duplicate detection works by comparing generated match codes of existing records with each new record being created. These match codes are created as each new record is created. Therefore, there is potential for one or more duplicate records to be created if they are processed at the exact same moment. In addition to detecting duplicates as they are created, you should schedule duplicate detection jobs to check for other potential duplicate records.
A company has a custom web-based solution that is hosted on Azure. You design a Power Platform solution to provide the company with additional capabilities. You need to integrate the Power Platform solution with the web-based solution. What should you recommend?
A. Connection reference B. Custom connector C. Desktop flow D. Data gateway
Correct Answer: B
A custom connector in Power Platform is a wrapper around a REST API that allows Power Automate or Power Apps to communicate with that REST API. Connectors created in Power Automate are available in Power Apps. Likewise, connectors created in Power Apps are available in Power Automate.
DRAG DROP You need to recommend the appropriate messaging channel solutions for the organization. What should you recommend? To answer, drag the appropriate messaging options to the correct user types. Each messaging option may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point. Select and Place:
Correct Answer:
Box 1: Omnichannel for Customer Service Dashboard Scenario: Workers must be able to communicate in near real-time with worker support agents. The company has a team of worker support agents that respond to inquiries from current and prospective workers. Some of the worker support agents are multilingual.
If you choose to expand your customer service offering to provide chat and channels, the Customer Service workspace seamlessly adjusts to support managing conversations as well. Note: As an agent with the Customer Service Representative security role, when you open the Customer Service workspace, you start on the Customer Service Agent Dashboard unless your administrator has changed the default view.
This dashboard shows you your active cases, cases you can work in queues you are assigned to, and your open activities. You can open existing cases and activities or begin working on new cases from the queues you are assigned to and create activities.
Box 2: Dynamics 365 Customer Service Scenario: First Up uses an on-premises system to manage current and historical patient data including medications and medical visits.
A company has a website that contains a form named Contact Us. Data from completed forms are saved to a shared document. An office administrator periodically reviews the document. The office administrator sends new submissions to another employee who creates contacts or updates existing contacts. You need to recommend a solution to automate the process. What should you recommend?
A. Excel Online Connector B. Dynamics 365 Customer Insights C. Dynamics 365 Customer Service D. Dynamics 365 Marketing
Correct Answer: B
Microsoft designed Customer Insights to allow organizations to map, match, merge, and enrich customer-based data from different sources. A classic scenario would be to merge data from customer service software, like Freshdesk, and online sales, such as Shopware, into one source for reporting and further data analysis.
HOTSPOT You are designing a Power Platform solution for a company. You have the following requirements: 1. Users in the human resources department must be able to create tasks. 2. Users in the human resources department must be able to assign cases to other users. You need to recommend security settings to the company. What should you recommend? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Hot Area:
Box 1: Assign only Create rights to activities You require the same set of Dataverse privileges and access rights to work with custom activities as those required to work with custom entities. Task-based privileges, at the bottom of the form, give a user privileges to perform specific tasks, such as publishing articles.
Box 2: Assign User-level assign rights to the human resources case table. Record-level privileges define which tasks a user with access to the record can do, such as Read, Create, Delete, Write, Assign, Share, Append, and Append To. For user and team-owned records, the access level choices for most privileges are tiered Organization, Business Unit, Business Unit, and Child Business Unit or only the user\’s own records. That means for the reading privilege on contact, I could set user owned, and the user would only see their own records.
Incorrect Answers: For security purposes, for records that are organization owned, the only access level choices is either the user can do the operation or can\’t.
HOTSPOT You are supporting the go-live process for a company. The company is responsible for migrating data to the Power Platform by using a custom solution.
The company reports the following issues: 1. Migration processes fail due to operation timeouts. 2. Records that include lookup columns often fail to load.
You need to recommend a solution. What should you recommend? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Hot Area:
Box 1: Increase multithreading and/or batch size settings Box 2: Ensure you are loading data in a specific order. Load the base tables in the hierarchies first.
QUESTION 8
You are designing a database table for a client. You have the following requirements: 1. Maintain a comprehensive list of colors and their corresponding RGB values and hexadecimal values. 2. Prevent the addition of duplicate colors based on the hexadecimal value for the color. You need to recommend a design for the table. Which two actions should the client perform after the table is created? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Mark the hex value column as business required. B. Configure and schedule a recurring bulk record deletion job. C. Create alternate keys for the table. D. Mark the RGB value column as business required.
Correct Answer: BC
B: Setting a column to Business Required means that the default behavior of a model-driven or canvas app will enforce this requirement in the app. C: With alternate keys, you can now define a column in a Dataverse table to correspond to a unique identifier (or a unique combination of columns) used by the external data store. This alternate key can be used to uniquely identify a record in Dataverse in place of the primary key. You must be able to define which columns represent a unique identity for your records. Once you identify the columns that are unique to the table, you can declare them as alternate keys through the customization user interface (UI) or in the code.
HOTSPOT You need to design the quality inspection order data model. What should you recommend? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point. Hot Area:
Each inspection order can have one or many inspection steps, and each inspection step has a rating. Note: Each pair of tables that are eligible to have a 1:N relationship can have multiple 1:N relationships between them. Yet usually only one of those relationships can be considered a parental table relationship.
A company uses manual processes to track interactions with customers. The company wants to use Power Platform to improve productivity. The company has the following requirements:
1. Provide customers with an online portal where they can submit and review cases. 2. Ensure that customers can chat online with a customer service representative at any time. 3. Route chats to customer service representatives based on skill and availability. You need to recommend a solution to the company.
Which three components should you recommend? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Dynamics 365 Virtual Agents chatbots B. Customer self-service portal C. Dynamics 365 Field Service D. Business process flows E. Omnichannel for Customer Service
Correct Answer: BDE
B: Customer self-service portal: A customer self-service portal enables customers to access self-service knowledge, and support resources, view the progress of their cases, and provide feedback. Note: Based on the selected environment in Power Apps, you can create a Dataverse starter portal or a portal in an environment containing customer engagement apps (Dynamics 365 Sales, Dynamics 365 Customer Service, Dynamics 365 Field Service, Dynamics 365 Marketing, and Dynamics 365 Project Service Automation).
E: Omnichannel for Customer Service offers a suite of capabilities that extend the power of Dynamics 365 Customer Service Enterprise to enable organizations to instantly connect and engage with their customers across digital messaging channels.
Incorrect Answers: A: The Dynamics 365 Field Service business application helps organizations deliver onsite service to customer locations. C: Dynamics 365 Virtual agent is a no-code-required AI-based application that is focused on providing customer service organizations the ability to engage in personalized conversations that go beyond the conversational search. Virtual agents provide the ability to deploy and manage the automation of handling problems with specific solutions.
A company is implementing Dynamics 365 Sales. The company has turned off out-of-the-box quote calculations in order to implement its own custom calculations. When users update a line item on a quote, they expect to see an updated total for the quote in real-time. Users are reporting inconsistent behavior, with some aggregations taking up to two hours.
You review the system design and notice many asynchronous workflows. You need to recommend a solution to enable the calculation in real-time. Which two options should you recommend? Each answer presents a complete solution. NOTE: Each correct selection is worth one point.
A. Consolidate asynchronous workflow into a single real-time workflow. B. Consolidate multiple asynchronous workflows into a single asynchronous workflow. C. Implement a business process flow to replace the existing workflows. D. Convert the asynchronous workflows to a synchronous plug-in.
Correct Answer: AB
QUESTION 12
You are designing a Power Platform solution. During quality assurance testing the API limits are reached. You need to identify and resolve the issue. Which two actions should you recommend? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Allocate Microsoft Dataverse capacity add-on subscriptions. B. Use the out-of-the-box User Summary report from the Reports section of the solution\’s model-driven app. C. Review the Home tab Dataverse analytics dashboard. D. In the Power Platform admin center, review the Usage section of the Power Apps analytics dashboard. E. In the Power Platform admin center, review the Runs section of the Power Automate analytics dashboard.
Correct Answer: AC
A: When users exceed their limits, administrators can see this in the admin center (see below). You can do either one of the following: 1. Adjust the app or flow to use fewer API requests 2. Purchase the Power Apps and Power Automate capacity add-on for your organization.
C: Home (default) Dashboard. This is the default dashboard that provides information on the number of active Dataverse users, storage usage, the most active workflows, and more.
A company uses two separate unlinked apps to manage sales leads a Power Apps app and a third-party application. The client has the following requirements:
1. Manage all leads by using the Power Apps app. 2. Create a lead in the Power Apps app when a user creates a lead in the third-party application. 3. Update leads in the Power Apps app when a user updates a lead in the third-party application. 4. Connect to the third-party application by using an API.
You need to recommend strategies to integrate the Power Apps app and the third-party application. Which three options can you use to achieve the goal? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Dual-write B. Custom connector C. Dataflow D. Power Automate cloud flow E. Common Data Service connector
Correct Answer: ADE
A: Customers should be able to adopt business applications from Microsoft and expect them to speak the same language and seamlessly work together. Dual Write allows our customers to not think about these apps as different systems to write to independently; rather, the underlying infrastructure makes it seamless for these apps to write simultaneously.
D: Use Custom APIs to create your own APIs in Dataverse. With a Custom API, you can consolidate a group of operations into an API that you and other developers can call in their code. The Common Data Service (current environment) connector enables calling Custom APIs actions in Power Automate.
E: Common Data Service provides access to the environment database on the Microsoft Common Data Service. It is available for Logic Apps, Power Automate, and Power Apps.
We’ve updated Microsoft MB-330 dumps as the latest MB-330 preparation resources to help you prepare for the Microsoft Dynamics 365 Supply Chain Management exam.
Go to the Pass4itSure MB-330 dumps page: https://www.pass4itsure.com/mb-330.html you will see the latest MB-330 Practice Q&A preparation resources presented in two forms (PDF and software), and with careful study, you will be able to pass easily.
Are you aware of the Microsoft MB-330 exam?
Exam MB-330 has another name, Microsoft Dynamics 365 Supply Chain Management Functional Consultant.
In the real MB-330 exam, there are 40-60 questions that need to be completed in 120 minutes, the exam costs $165, and the passing score costs 700 points.
Related Exam: Exam MB-300: Microsoft Dynamics 365: Core Finance and Operations
Useful learning resources for exam MB-330:
Configure and manage products and inventory in Dynamics 365 Supply Chain Management
Configure and manage procurement and vendors in Dynamics 365 Supply Chain Management
Configure and manage sales, and customers in Dynamics 365 Supply Chain Management
Configure and work with warehouse management in Dynamics 365 Supply Chain Management
Master planning in Dynamics 365 Supply Chain Management
Configure and work with transportation management in Dynamics 365 Supply Chain Management
Microsoft Certified: Dynamics 365 Supply Chain Management Functional Consultant Associate
To earn the Dynamics 365 Supply Chain Management Functional Consultant Associate designation, you will pass two exams:
Microsoft Dynamics 365: Core Finance and Operations (MB-300)
Microsoft Dynamics 365 Supply Chain Management Functional Consultant (MB-330)
Among them is the MB-330 exam mentioned today.
How to effectively prepare for exam MB-330?
When it comes to preparing for the Microsoft Dynamics 365 Supply Chain Management exam, you must have valid Microsoft MB-330 preparation resources.
Pass4itSure MB-330 dumps are recommended here, preparing you for exam resources that are validated with valid information to ensure a pass.
How do the Pass4itSure MB-330 dumps help you pass the Microsoft MB-330 exam?
By choosing the Pass4itSure website, you will receive 277 unique practice questions and answers to your Microsoft MB-330 exam, which will help you master the knowledge needed for the exam and successfully pass the MB-330 exam.
Practice Now, MB-330 Free Dumps Exam [2022] Questions Answers
Q1.
You configure purchasing policies and oversee purchasing processes for a company. Users often submit requisitions with incorrect information. Users also select non-approved vendors or incorrect categories. You need to set up a procurement policy that limits which procurement categories and vendors can be selected. Which two policy rules should you configure? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Category access policy rule B. Purchase requisition control rule C. Catalog policy rule D. Category policy rule
You work for a distribution company that makes use of a Dynamics 365 Supply Chain Management system. You are responsible for planning. When you notice that planned orders for a specific item are increasing, you plan to track the source of the planned orders and release them according to their demand.
You want to make sure that a unique planned purchase order is created by the master planning batch job for each new demand requirement for the item. You configure the use of the Per requirement coverage code lot-sizing method. Does the action achieve your objective?
HOTSPOT A company creates loads to ship sales orders. Loads must be shipped by using the lowest freight rates possible. You need to use the load planning workbench to create a load for sales order shipments. Which configuration options should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Q4.
DRAG DROP A company uses Dynamics 365 Supply Chain Management. You need to perform month-end close processes.
At which process steps should you perform the actions? To answer, drag the appropriate process steps to the appropriate actions. Each process step may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Q5.
A company uses Dynamics 365 Supply Chain Management. Orders are reserved against open purchase orders that have not yet been received. As a result, there are issues prioritizing deliveries, which is causing backorders on both sales orders and transfer orders. Negative inventory is not currently allowed.
Product reservations must be performed against physical stock only. You need to update the configuration for product reservations. What should you do?
A. Clear the Reserve Items Automatically check the box for transfers. B. Clear the Reserve Ordered Items check box. C. Select the Auto batch reservations check box. D. Select the Physical negative inventory check box.
A company sells jars of sliced or whole pickles. The company produces jars of various sizes. You need to set up the item to ensure that pickles have a single item number for all container sizes. What are two possible ways to achieve this goal? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.
A. Set up the size, color, and style of each legal entity. Go to the products form, create a new product and assign it to each dimension.
B. Create a new product master with predefined variant configuration technology and release it to the legal entities. Use the product dimensions to define the size, color, and style.
C. Create and release a product to the legal entities. Use the storage dimensions to define the size, color, and style.
D. Create a new product master with dimension-based configuration technology and release it to the legal entities. Use the configuration to define the size, color, and style.
DRAG DROP You need to implement location directives in Dynamics 365 Supply Chain Management. Which objects should you use? To answer, drag the appropriate objects to the correct permissions. Each object may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
HOTSPOT You need to configure the system to support regional sales requirements. Which group assignments should you use? To answer, select the appropriate options in the answer area. NOTE. Each correct selection is worth one point.
Hot Area:
Q9.
A company uses Dynamics 365 Supply Chain Management. The company is consistently short on inventory for a group of produced finished goods items. This creates customer service issues. You need to ensure that production orders are automatically created when inventory is low. Which two actions should you perform? Each answer represents a partial solution.
NOTE: Each correct selection is worth one point.
A. Update the item maximum. B. Update the item minimum. C. Set Capable to Promise. D. Create a safety stock journal. E. Create a transfer journal.
HOTSPOT A company orders parts from a vendor. The vendor frequently ships more units than the company orders. An approving manager must receive a notification when the quantity of units received is more than 10 percent above the number of units ordered.
You have an existing notification workflow. You need to ensure that the notification is generated. How should you configure the system? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Hot Area:
Correct Answer:
Q11.
A company implements the Dynamics 365 Supply Chain Management procurement module. During testing, you observe that no transactions are posted to the product receipt journal when an item is received. You need to configure the system to show the appropriate transactions in the product receipt journal. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. On the Item group setup form, enter account information in the Purchase, accrual, and Purchase expenditure, uninvoiced account fields. B. On the Item model group setup form, select Include physical value. C. On the item group setup form, enter account information in the Purchase, accrual, and Purchase expenditure for product fields. D. On the Item model group setup form, select Accrue liability on the product receipt.
Correct Answer: AD
Q12.
A company has several warehouse locations. The company acquires a new warehouse. You must design a new warehouse process workflow for the new warehouse. You need to configure the workflow. Which three features should you configure? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. work pools B. cluster picking C. outbound wave processing D. work templates E. wave templates
A company uses planning optimization in Dynamics 365 Supply Chain Management. A planning optimization job is triggered by mistake from the user interface. The planning optimization job is running with incorrect runtime filters. You need to resolve the issue. What should you do?
A. Cancel the job from the plan history. B. Cancel the job from the dialog box. C. Disable the environment add-in. D. Cancel the planning optimization fit analysis.
Use the latest MB-330 dumps https://www.pass4itsure.com/mb-330.html to prepare for the Microsoft Dynamics 365 Supply Chain Management exam with ease and enjoyment.
You must look for real Microsoft DP-203 practice material to pass the Data Engineering on Microsoft Azure exam. Pass4itSure updated DP-203 exam dumps are the best DP-203 practice material.
Download the DP-203 exam dumps webpage https://www.pass4itsure.com/dp-203.html and you’ll see 246+ new Microsoft DP-203 practice Q&A materials to help you learn easily.
About exam DP-203: What about Data Engineering on Microsoft Azure?
For the Data Engineering on Microsoft Azure exam, you can simply call the DP-203 exam.
The DP-203 test languages are English, Chinese (Simplified), Japanese, Korean, German, French, Spanish, Portuguese (Brazil), Arabic (Saudi Arabia), Russian, Chinese (Traditional), Italian, and Indonesian (Indonesia). You’ll need to complete 40-60 exam questions in 130 minutes with a passing score of at least 700. The exam costs $165.
Passing the DP-203 exam will help candidates become Microsoft Certified: Azure Data Engineer Associates.
What are the effective DP-203 exam learning resources?
Azure for the Data Engineer
Store data in Azure
Data integration at scale with Azure Data Factory or Azure Synapse Pipeline
Realize Integrated Analytical Solutions with Azure Synapse Analytics
Work with Data Warehouses using Azure Synapse Analytics
Perform data engineering with Azure Synapse Apache Spark Pools
Work with Hybrid Transactional and Analytical Processing Solutions using Azure Synapse Analytics
Data engineering with Azure Databricks
Large-Scale Data Processing with Azure Data Lake Storage Gen2
Implement a Data Streaming Solution with Azure Streaming Analytics
How to efficiently prepare for the Data Engineering on Microsoft Azure exam?
Familiarize yourself with the basics of the DP-203 exam
In order to be better prepared, the basics of the Microsoft DP-203 exam will be necessary.
Find the real Microsoft DP-203 practice material
The Pass4itSure DP-203 exam dumps are a great choice for you, containing real and up-to-date exam practice materials to help you pass.
Practice regularly
With the DP-203 exam practice, you will learn about your weaknesses and strengths. Thus successfully cracking the exam.
Practice DP-203 Free Dumps Questions and Answers
QUESTION 1
You are developing a solution that will stream to Azure Stream Analytics. The solution will have both streaming data and reference data. Which input type should you use for the reference data?
A. Azure Cosmos DB B. Azure Blob storage C. Azure IoT Hub D. Azure Event Hubs
Correct Answer: B
Stream Analytics supports Azure Blob storage and Azure SQL Database as the storage layer for Reference Data.
DRAG DROP You need to create a partitioned table in an Azure Synapse Analytics dedicated SQL pool. How should you complete the Transact-SQL statement? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point. Select and Place:
Correct Answer:
Box 1: DISTRIBUTION Table distribution options include DISTRIBUTION = HASH ( distribution_column_name ), assigns each row to one distribution by hashing the value stored in distribution_column_name. Box 2: PARTITION Table partition options. Syntax: PARTITION ( partition_column_name RANGE [ LEFT | RIGHT ] FOR VALUES ( [ boundary_value [,…n] ] ))
You have an Azure subscription linked to an Azure Active Directory (Azure AD) tenant that contains a service principal named ServicePrincipal1. The subscription contains an Azure Data Lake Storage account named adls1. Adls1 contains a folder named Folder2 that has a URI of https://adls1.dfs.core.windows.net/container1/Folder1/Folder2/. ServicePrincipal1 has the access control list (ACL) permissions shown in the following table.
You need to ensure that ServicePrincipal1 can perform the following actions: 1. Traverse child items that are created in Folder2. 2. Read files that are created in Folder2.
The solution must use the principle of least privilege. Which two permissions should you grant to ServicePrincipal1 for Folder2? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Access – Read B. Access – Write C. Access – Execute D. Default-Read E. Default – Write F. Default – Execute
Correct Answer: DF
Execute (X) permission is required to traverse the child items of a folder. There are two kinds of access control lists (ACLs), Access ACLs and Default ACLs. Access ACLs: These control access to an object. Files and folders both have Access ACLs.
Default ACLs: A “template” of ACLs associated with a folder that determine the Access ACLs for any child items that are created under that folder. Files do not have Default ACLs.
HOTSPOT You are designing an enterprise data warehouse in Azure Synapse Analytics that will store website traffic analytics in a star schema. You plan to have a fact table for website visits. The table will be approximately 5 GB. You need to recommend
which distribution type and index type to use for the table. The solution must provide the fastest query performance. What should you recommend? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Hot Area:
Box 1: Hash Consider using a hash-distributed table when: The table size on disk is more than 2 GB. The table has frequent insert, update, and delete operations.
Box 2: Clustered columnstore Clustered columnstore tables offer both the highest level of data compression and the best overall query performance.
QUESTION 5
You have an enterprise data warehouse in Azure Synapse Analytics named DW1 on a server named Server1. You need to determine the size of the transaction log file for each distribution of DW1. What should you do?
A. On DW1, execute a query against the sys.database_files dynamic management view. B. From Azure Monitor in the Azure portal, execute a query against the logs of DW1. C. Execute a query against the logs of DW1 by using the Get-AzOperationalInsightsSearchResult PowerShell cmdlet. D. On the master database, execute a query against the sys.dm_pdw_nodes_os_performance_counters dynamic management view.
Correct Answer: A
For information about the current log file size, its maximum size, and the autogrow option for the file, you can also use the size, max_size, and growth columns for that log file in sys.database_files.
You have an Azure Data Factory that contains 10 pipelines. You need to label each pipeline with its main purpose of either ingest, transform, or load. The labels must be available for grouping and filtering when using the monitoring experience in Data Factory.
What should you add to each pipeline?
A. a resource tag B. a correlation ID C. a run group ID D. an annotation
Correct Answer: D
Annotations are additional, informative tags that you can add to specific factory resources: pipelines, datasets, linked services, and triggers. By adding annotations, you can easily filter and search for specific factory resources.
DRAG DROP You are responsible for providing access to an Azure Data Lake Storage Gen2 account. Your user account has contributor access to the storage account, and you have the application ID and access key. You plan to use PolyBase to load data into an enterprise data warehouse in Azure Synapse Analytics. You need to configure PolyBase to connect the data warehouse to storage account.
Which three components should you create in sequence? To answer, move the appropriate components from the list of components to the answer area and arrange them in the correct order.
Select and Place:
Step 1: a database scoped credential To access your Data Lake Storage account, you will need to create a Database Master Key to encrypt your credential secret used in the next step. You then create a database scoped credential.
Step 2: an external data source Create the external data source. Use the CREATE EXTERNAL DATA SOURCE command to store the location of the data. Provide the credential created in the previous step.
Step 3: an external file format Configure data format: To import the data from Data Lake Storage, you need to specify the External File Format. This object defines how the files are written in Data Lake Storage.
You have an enterprise data warehouse in Azure Synapse Analytics. Using PolyBase, you create an external table named [Ext].[Items] to query Parquet files stored in Azure Data Lake Storage Gen2 without importing the data to the data warehouse.
The external table has three columns. You discover that the Parquet files have a fourth column named ItemID. Which command should you run to add the ItemID column to the external table?
A. Option A B. Option B C. Option C D. Option D
Correct Answer: C
Incorrect Answers: A, D: Only these Data Definition Language (DDL) statements are allowed on external tables: 1. CREATE TABLE and DROP TABLE 2. CREATE STATISTICS and DROP STATISTICS 3. CREATE VIEW and DROP VIEW
You have an Azure Synapse Analytics dedicated SQL pool. You run PDW_SHOWSPACEUSED(dbo,FactInternetSales\’); and get the results shown in the following table.
Which statement accurately describes the dbo,FactInternetSales table?
A. The table contains less than 1,000 rows. B. All distribution contain data. C. The table is skewed. D. The table uses round-robin distribution.
Correct Answer: C
Data skew means the data is not distributed evenly across the distributions.
A company has a real-time data analysis solution that is hosted on Microsoft Azure. The solution uses Azure Event Hub to ingest data and an Azure Stream Analytics cloud job to analyze the data. The cloud job is configured to use 120 Streaming Units (SU).
You need to optimize performance for the Azure Stream Analytics job. Which two actions should you perform? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Implement event ordering. B. Implement Azure Stream Analytics user-defined functions (UDF). C. Implement query parallelization by partitioning the data output. D. Scale the SU count for the job up. E. Scale the SU count for the job down. F. Implement query parallelization by partitioning the data input.
Correct Answer: DF
D: Scale out the query by allowing the system to process each input partition separately. F: A Stream Analytics job definition includes inputs, a query, and output. Inputs are where the job reads the data stream from.
DRAG DROP You need to build a solution to ensure that users can query specific files in an Azure Data Lake Storage Gen2 account from an Azure Synapse Analytics serverless SQL pool. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.
Select and Place:
Step 1: Create an external data source You can create external tables in Synapse SQL pools via the following steps: CREATE EXTERNAL DATA SOURCE to reference external Azure storage and specify the credential that should be used to access the storage. CREATE EXTERNAL FILE FORMAT to describe the format of CSV or Parquet files. CREATE EXTERNAL TABLE on top of the files placed on the data source with the same file format.
Step 2: Create an external file format object Creating an external file format is a prerequisite for creating an external table.
Step 3: Create an external table
QUESTION 12
You have an Azure Stream Analytics query. The query returns a result set that contains 10,000 distinct values for a column named cluster. You monitor the Stream Analytics job and discover high latency. You need to reduce the latency.
Which two actions should you perform? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.
A. Add a pass-through query. B. Add a temporal analytic function. C. Scale out the query by using PARTITION BY. D. Convert the query to a reference query. E. Increase the number of streaming units.
Correct Answer: CE
C: Scaling a Stream Analytics job takes advantage of partitions in the input or output. Partitioning lets you divide data into subsets based on a partition key. A process that consumes the data (such as a Streaming Analytics job) can consume and write different partitions in parallel, which increases throughput.
E: Streaming Units (SUs) represent the computing resources that are allocated to execute a Stream Analytics job. The higher the number of SUs, the more CPU and memory resources are allocated for your job. This capacity lets you focus on the query logic and abstracts the need to manage the hardware to run your Stream Analytics job in a timely manner.
You are designing an Azure Stream Analytics solution that will analyze Twitter data. You need to count the tweets in each 10-second window. The solution must ensure that each tweet is counted only once. Solution: You use a tumbling window, and you set the window size to 10 seconds. Does this meet the goal?
A. Yes B. No
Correct Answer: A
Tumbling windows are a series of fixed-sized, non-overlapping and contiguous time intervals. The following diagram illustrates a stream with a series of events and how they are mapped into 10-second tumbling windows.
For more information on the answers to questions about the DP-203 exam, here.
You must have the latest AZ-140 exam dumps to effectively prepare for the Microsoft Azure AZ-140 exam. How to have it, we have already considered it for you.
Please select the Pass4itSureAZ-140 exam dumps >> https://www.pass4itsure.com/az-140.html as a valid MicrosoftAZ-140 exam material for easy preparation for the Configuring and Operating Windows Virtual Desktop on Microsoft Azure exam.
Pass4itSure AZ-140 exam dumps can help you easily prepare for the Configuring and Operating Windows Virtual Desktop on Microsoft Azure exam.
How do you understand the AZ-140 exam?
The AZ-140 exam has 40-60 questions in a multiple-choice format. The test languages are: Arabic (Saudi Arabia), German, English, Spanish, French, Indonesian (Indonesia), Italian, Japanese, Korean, Portuguese (Brazil), Russian, Chinese (Simplified), Chinese (Traditional). You will have a total of 120 minutes to complete the entire exam. The AZ-140 exam fee is also $165.
What are the resources for learning the AZ-140 exam?
Deliver remote desktops and apps with Azure Virtual Desktop
Configuring and Operating Microsoft Azure Virtual Desktop
Pass4itSure AZ-140 exam dumps
Is the AZ-140 exam difficult? So how do you prepare?
The AZ-140 exam is not easy to pass, which means you need to have a thorough understanding of the exam and need to have new exam materials to prepare for the exam.
Pass4itSure AZ-140 exam dumps are the valid AZ-140 exam materials. Helps you easily prepare for the Configuring and Operating Windows Virtual Desktop on Microsoft Azure exam.
AZ-140 Free Dumps: Configuring and Operating Microsoft Azure Virtual Desktop Exam Questions Answers
1. Which two roles should you assign to Admin2 to meet the security requirements? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Desktop Virtualization Host Pool Contributor B. Desktop Virtualization Application Group Contributor C. Desktop Virtualization Workspace Contributor D. Desktop Virtualization Application Group Reader E. User Access Administrator
2. Your company has a single office and has 40 employees. You are planning an Azure Virtual Desktop deployment. The estimated user workloads are shown in the following table.
Half the users of each workload type work from home. All the users who work from home do NOT establish a VPN connection to the office. Approximately how much bandwidth is needed between the office and Azure to support the planned workloads?
A. 9.5 Mbps B. 55 Mbps C. 110 Mbps D. 220 Mbps Correct Answer: B
3. You have an Azure Virtual Desktop deployment. You implement FSLogix profile containers. You need to ensure that the FSLogix profile containers are not used for specific users. What should you do?
A. Modify the local groups on each session host B. Apply an Application Masking rule to each session host C. Apply an AppLocker policy to each session host D. Modify the RDP Properties of the host pool
4. Your network contains an on-premises Active Directory domain and a Windows Virtual Desktop deployment. The computer accounts for all the session hosts are in an organizational unit (OU) named WVDHostsOU. All user accounts are in an OU named CorpUsers.
A domain administrator creates a Group Policy Object (GPO) named Policy1 that only contains user settings. The administrator links Policy1 to WVDHostsOU. You discover that when users sign in to the session hosts, none of the settings from Policy1 are applied. What should you configure to apply GPO settings to the users when they sign in to the session hosts?
A. loopback processing B. FSLogix profiles C. mandatory Roaming User Profiles D. restricted groups
5. You have a shared image gallery that contains the Windows 10 images shown in the following table.
You create an Azure Virtual Desktop deployment that has the following settings: 1. Host pool name: Pool1 2. Location: West US 3. Host pool type: Personal Which images can you use for the session hosts?
A. Image1 only B. Image1, Image2, Image3, and Image4 C. Image2 only D. Image1 and Image2 only E. Image1 and Image3 only
6. DRAG DROP You have a Windows Virtual Desktop deployment. You have a session host named Host1 that has the disk layout shown in the exhibit. (Click the Exhibit tab.)
You plan to deploy an app that must be installed on D. The app requires 500 GB of disk space. You need to add a new data disk that will be assigned the drive letter D. The solution must maintain the current performance of Host1.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
7. You have a Windows Virtual Desktop host pool. You need to install Microsoft Antimalware for Azure on the session hosts. What should you do?
A. Add an extension to each session host. B. From a Group Policy Object (GPO), enable Windows 10 security features. C. Configure the RDP Properties of the host pool. D. Sign in to each session host and install a Windows feature.
9. You have an Azure Active Directory (Azure AD) tenant named contoso.com and an Azure virtual network named VNET1. To VNET1, you deploy an Azure Active Directory Domain Services (Azure AD DS) managed domain named litwareinc.com. To VNET1, you plan to deploy a Windows Virtual Desktop host pool named Pool1.
You need to ensure that you can deploy Windows 10 Enterprise host pools to Pool1. What should you do first?
A. Modify the settings of the litwareinc.com DNS zone. B. Modify the DNS settings of VNET1. C. Add a custom domain name to contoso.com. D. Implement Azure AD Connect cloud sync.
10. You have an Azure Virtual Desktop host pool named Pool1 in the East US region. You have a storage account named storage1 that contains FSLogix profile containers. In the East US region, you have a shared image gallery named SG1 that contains a virtual machine image named Image1. Image1 is used to create new session hosts in Pool1.
You plan to deploy a new Azure Virtual Desktop host pool named Pool2 to the South India region. You need to implement a session host deployment solution for Pool2 that meets the following requirements:
1. Image1 must replicate in the South India region. 2. The session hosts in Pool2 must be based on Image1. 3. Changes to Image1 must be available in the South India and East US regions. What should you include in the solution?
A. Create a new shared image gallery named SIG2 in the South India region. Upload a copy of Image1 to SIG2. B. Create a new Azure Storage account named storage2 in the South India region. Copy Image1 to a shared folder in storage2. C. From SIG1, update the replication for the latest image version of Image1. D. Configure geo-redundant storage (GRS) replication for storage1. Copy the VHD file of Image1 to the FSLogix profile container.
11. HOTSPOT Which users can create Pool4, and which users can join session hosts to the domain? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. Hot Area:
Correct Answer:
12. You have an Azure Virtual Desktop deployment. You need to create a PowerShell script to sign users out of a specific session host before you perform a maintenance task. Which PowerShell module should you load in the script?
A. Az.Automation B. Az.Compute C. Az.Maintenance D. Az.DesktopVirtualization
13. DRAG DROP You have a Windows Virtual Desktop host pool named Pool1. Pool1 contains session hosts that use FSLogix profile containers hosted in Azure NetApp Files volumes. You need to back up profile files by using snapshots.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
The good preparation material is important for passing the Microsoft MB-220 exam. We have updated the Microsoft Dynamics 365 Marketing preparation material for you – the latest Pass4itSure MB-220 dumps.
Pass4itSure has updated the Microsoft MB-220 dumpshttps://www.pass4itsure.com/mb-220.html with the latest questions and answers (144 questions), which ensures your success in Microsoft Dynamics 365 Marketing exam.
Pass4itSure gives you two options (PDF and software) to get the latest MB-220 dumps questions and prepare for exams smoothly and efficiently.
How would you describe the MB-220: Microsoft Dynamics 365 Marketing exam?
Exam MB-220: Microsoft Dynamics 365 Marketing Functional Consultant requires you to answer 40-60 questions in 120 minutes and needs to achieve a 700 out of 1000 passing scores. The MB-220 exam costs $165.
What preparation resources are available for the MB-220 exam?
Set up Dynamics 365 Marketing and configure advanced settings
Work with core features in Dynamics 365 Marketing
Manage events in Dynamics 365 Marketing
Analyze insights in Dynamics 365 Marketing
Pass4itSure MB-220 Dumps
Which preparation material is best to prepare for the Microsoft MB-220 exam?
Here is the Pass4itSure platform, where you can get preparation materials for the Microsoft MB-220 exam preparation. It’s called the Pass4itSure MB-220 dumps and can take you to success.
Microsoft Dynamics 365 Marketing free dumps questions:
Q1
DRAG DROP You are responsible for all outgoing marketing emails at Contoso, Ltd. You are tasked with the best practices aimed at increasing delivery and interaction rates. Which question is answered by the email insight statistic listed?
To answer, drag the email statistic to the question answered by that statistic. Each statistic may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view the content. NOTE: Each correct selection is worth one point.
Select and Place:
Q2
DRAG DROP Your boss has asked you to send out a simple email campaign using a Customer Journey. Which four activities must you perform in sequence? (Choose four.) To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Q3
You are a Dynamics 365 functional consultant for Contoso Ltd. Contoso is expanding to other countries/regions and you need to translate one of your English surveys into French. Which step should you take to translate the survey so that all of your existing segments and journeys remain intact?
A. Update the existing survey, and translate the labels to French. B. Clone the survey, and translate all labels to French. C. Set the form to multilingual, add French, and then translate the labels. D. Create a branched survey that asks the language preference. Then, display the appropriate translated section.
Your marketing department needs to create a Customer Journey for female wine enthusiasts over 40 years old who live in Europe. How should you define who receives this Customer Journey?
A. Create a Static segment. B. Create a Segment Type. C. Edit the contacts in the database. D. Create a Dynamic segment.
Correct Answer: D
Q5
DRAG DROP You have been asked to create a report that shows your company\\’s customer journeys by status reason. Which Status Reasons correspond to the descriptions? To answer, drag the appropriate Status Reason to the correct description. Each Status Reason may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view the content.
DRAG DROP You are a marketing administrator. You need to edit a web page that contains a form used for holiday offers. The page and form are visible to the outside world.
Which five steps, in order, are needed to complete your task? (Choose five.) To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Correct Answer:
Q7
You are creating a customer journey that sends an email newsletter to a subscription list advertising a limited-time offer. The customer journey start and end dates are May 24 through May 29. The customer journey is configured to send the email, wait one (1) week, then send a follow-up email reminding customers to take advantage of the offer in the newsletter.
Which error should you expect to see in the customer journey designer?
A. The Audience tile will give you an error saying the journey cannot proceed due to date misconfiguration. B. The Newsletter Email tile will give you an error saying the email is being sent out of date range. C. The Follow-up Email tie will give you an error saying it cannot be sent outside the specified journey date range. D. The Wait tile will give you an error saying the tile is set to expire after the journey end date.
Correct Answer: D
Q8
You are a Dynamics 365 Marketing functional consultant. The marketing department wants to see customer journeys, appointments, and events in a single calendar, rather than as a list. What should be enabled and configured to achieve this goal?
A. the Marketing Calendar Control on the designated entities B. the Calendar Control on the designated forms C. the Calendar Control on the designated entities D. the Marketing Calendar Control on the designated forms
You are the marketing manager at Contoso, Ltd. Your team has created a survey and sent out the link through email for responses. You want to understand the outcome from the Satisfaction Metrics report and identify the metrics created by default in Dynamics. For the metrics, what are the three charts created by default in Dynamics?
Each correct answer presents a complete solution.
A. Respondents – tracked and anonymous B. Sentiment C. Net Promoter Score D. Total Responses E. CSAT
DRAG DROP You are building a marketing email for your employer. Before you send the email, there are a number of things you must include in order to pass the Dynamics 365 Marketing error checker. Which of these items are required and which are simply best practices? To answer, drag the appropriate answer source to the correct email element.
Each answer may be used once, or more than once. You may need to drag the split bar between panes or scroll to view content. NOTE: Each correct selection is worth one point.
You are an event coordinator for Contoso, Ltd, and are creating a multi-day tradeshow event. You need to set up an event team that will consist of Contoso, Ltd employees, vendors, partners, and customers. Which two kinds of records should you associate with the event team member? Each correct answer presents a complete solution.
You are a marketing professional for Contoso, Ltd. You have set up a webinar event showcasing the new features of a new product. On the event record, you have set Allow anonymous registrations to Yes. When you check the portal website, you notice that you must create a registration account to register for the event.
Why might the event require you to register anonymously, despite the setting above?
A. Your portal is a site hosted externally. B. Your portal is a site hosted by Dynamics 365 Portals. C. Your portal is Dynamics Native Portal. D. You must republish the event.
You are the manager of Internet sales for your company. You have been asked to create and distribute a post-purchase survey to both registered and guest customers purchasing on your site. Which three things will be true about the distribution of your survey? (Choose three.) Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.
A. When distributing your Dynamics 365 for Marketing Survey, you may invite either anonymous or non-anonymous respondents. B. An optional invitation email, utilizing either a direct email or an email template, may be sent to each potential nonanonymous respondent. C. As an option, the design of your survey can include a limitation that restricts multiple completions by a single nonanonymous respondent. D. All respondents will receive the exact same hyperlink to connect them to the survey that you are inviting them to complete.
Listen to me, using the latest Microsoft MS-600 dumps, using the practice materials inside (MS-600 Exam Q&A), you can effectively prepare for the Building Applications and Solutions with Microsoft 365 Core Services exams.
Up-to-Date Microsoft MS-600 dumps download link https://www.pass4itsure.com/ms-600.html best MS-600 exam prep. It can help you prepare for the Microsoft MS-600 exam so that you can understand the exam content well until you pass successfully.
Pass4itSure MS-600 dumps let you not prepare uselessly.
Is it the exam MS-600 you know?
Exam MS-600 has another name: Building Applications and Solutions with Microsoft 365 Core Services.
The MS-600 exam is in German, English, Spanish, French, Italian, Japanese, Korean, Portuguese (Brazil), Russian, Chinese (Simplified), and Chinese (Traditional) languages, and you will need to complete 40-60 multiple choice questions in 120 minutes. A passing score of 700 passes (1-1000 points), costs $165.
How difficult is the Microsoft 365 MS-600 exam?
Don’t be afraid. The Microsoft MS-600 exam uses the right method and can pass it with all your efforts.
Prepare for the Microsoft MS-600 exam using the Pass4itSure MS-600 dumps and you’ll successfully pass the Buildning Applications and Solutions with Microsoft 365 Core Services exam.
Microsoft MS-600 exam resources do you want?
The summary is as follows:
Extend Microsoft 365 – Fundamental
Build apps with Microsoft Graph – Associate
Implement Microsoft identity – Associate
Develop apps for Microsoft Teams – Associate
Pass4itSure MS-600 dumps
How to effectively prepare for Microsoft exam MS-600?
I guess there may be these answers:
Join Microsoft Community. Practice Tests. Official Training. ……
These are also the right ways, but not comprehensive. All you need to do is download the latest MS-600 dumps, use the dumps material to practice and prepare for the MS-600 exam questions to confidently win the exam with excellent results.
You are developing a web app that will display emails from the Microsoft 365 mailbox of the current signed-in user. For performance reasons, you do not want all the emails to be loaded simultaneously, rather page-by-page as the user navigates the app.
You plan to display 30 emails per page. The most recent emails must be displayed first. How should you complete the query parameters for the REST request to display the third page of emails? To answer, drag the appropriate query parameters to the correct targets. Each query parameter may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.
Box 1: top Number of items to return in a result Box 2: skip $skip Indexes into a result set. Also used by some APIs to implement paging and can be used together with $top to manually page results.
Incorrect Answers: $select To specify a different set of properties to return than the default set provided by the Graph, use the $select query option. The $select option allows for choosing a subset or superset of the default set returned. For example, when retrieving your messages, you might want to select that only the from and subject properties of messages are returned. $search To restrict the results of a request that match a search criterion, use the $search query parameter. You cannot use $filter or $orderby in a $search request.
This question requires that you evaluate the underlined text to determine if it is correct. You develop a Microsoft Teams application that uses a messaging extension. Users can invoke the messaging extension from the Teams sidebar menu.
Instructions: Review the underlined text. If it makes the statement correct, select “No change is needed”. If the statement is incorrect, select the answer choice that makes the statement correct.
A. No change is needed B. from the compose box of a Teams chat C. by using the Manage teams option for a team D. by using the Add a tab option in the Teams channel
Correct Answer: B
In the app manifest for your Microsoft Teams app you\’ll define a single messaging extension with up to ten different commands. Each command defines a type (action or search), and the locations in the client it can be invoked from (compose message area, command bar, and/or message).
You are designing a Microsoft Teams application. The application will enable content authors to start conversations about news coming from a third-party application. Which development technique should you use?
A. incoming webhooks B. outgoing webhooks C. activity feeds D. deep links
Correct Answer: D
Create deep links to content and features in Microsoft Teams. You can create links to information and features within the Teams client. Examples of where this may be useful:
Your app automates or simplifies certain user tasks, such as creating a chat or scheduling a meeting, by pre-populating the deep links with required parameters. This avoids the need for users to manually enter information. Navigating the user to content within one of your app\’s tabs.
Incorrect Answers: A: Incoming webhooks are the simplest type of connector. Connectors allow users to subscribe to receive notifications and messages from your web services B: Outgoing webhooks allow your users to send text messages from a channel to your web services. Once configured, your users will be able to @mention your outgoing webhook. C: The activity feed in Microsoft Teams is the user\’s single inbox for all activity across Teams. The feed aggregates important content.
DRAG DROP You need to implement the role functionality for the backend web service calls. Which three actions should you perform in sequence? To answer, move the actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Correct Answer:
Q-5
You need to develop an add-in for Microsoft Excel that can be used from the Windows, Mac, and web versions of Excel. What are two ways to develop the add-in? Each correct answer presents a complete solution?
NOTE: Each correct selection is worth one point.
A. From Microsoft Teams, install App Studio B. From Microsoft Visual Studio that has the Microsoft Office/SharePoint development workload installed, create a new project that uses a Web Add-in template C. From the Microsoft Office 365 portal, use Microsoft PowerApps D. Use the Yeoman generator for Microsoft Office Add-ins to create the project, and then open the project in Microsoft Visual Studio Code E. From Microsoft Visual Studio that has the Microsoft Office/SharePoint development workload installed, create a new project that uses a Visual Studio Tools for Office (VSTO) template
Correct Answer: DE
D: Run the following command to create an add-in project using the Yeoman generator: yo office Visual Studio Code is a great tool to help you develop your custom Office Add-ins regardless if they are for Outlook, Word, Excel, PowerPoint and run in the web clients, Windows clients, iOS clients or on macOS. Open the project in Visual Studio Code by entering the following on the command line from within the same folder where you ran the generator: code.
E: You can create VSTO Add-ins for Excel. To create a new Excel VSTO Add-in project in Visual Studio 2. Start Visual Studio. 3. On the File menu, point to New, and then click Project. 4. In the templates pane, expand Visual C# or Visual Basic, and then expand Office/SharePoint. 5. Under the expanded Office/SharePoint node, select the Office Add-ins node. 6. In the list of project templates, select Excel 2010 Add-in or Excel 2013 Add-in. 7. In the Name box, type FirstExcelAddIn. 8. Click OK. Visual Studio creates the FirstExcelAddIn project and opens the ThisAddIn code file in the editor.
HOTSPOT For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct select is worth one point. Hot Area:
Correct Answer:
Q-7
DRAG DROP You are developing a sever-based application that has the following requirements: Prompt the user to fill out a form that contains a keyword. Search the Microsoft OneDrive folder for files that contain the keyword and return the results to the user. Allow the user to select one of the files from the results. Copy the selected file to an Azure Blob storage container.
Which four actions should the application perform in sequence? To answer, move the actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Correct Answer:
Q-8
You receive the following JSON document when you use Microsoft Graph to query the current signed-in user.
For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Hot Area:
Box 1: Yes Syntax: GET /me/photo/$value Get the specified profilePhoto or its metadata (profilePhoto properties). Example: Get the photo for the signed-in user in the largest available size GET https://graph.microsoft.com/v1.0/me/photo/$value Box 2: Yes Syntax: GET /users/{id | userPrincipalName}/photo/$value Get the specified profilePhoto or its metadata (profilePhoto properties). Box 3: Yes Syntax: GET /users/{id | userPrincipalName}/photo/$value Get the specified profilePhoto or its metadata (profilePhoto properties).
You need to complete the MSAL.js code for SSO. Which code segment should you insert at line 06?
A. storeAuthStateInCookie: false B. storeAuthStateInCookie: true C. cacheLocation: ‘localStorage
Correct Answer: C
Scenario: Implement single sign-on (SSO) and minimize login prompts across browser tabs. When your application is open in multiple tabs and you first sign in the user on one tab, the user is also signed in on the other tabs without being prompted. MSAL.js caches the ID token for the user in the browser localStorage and will sign the user in to the application on the other open tabs.
By default, MSAL.js uses sessionStorage which does not allow the session to be shared between tabs. To get SSO between tabs, make sure to set the cacheLocation in MSAL.js to localStorage.
You need to protect the backend web service to meet the technical requirements. Which four actions should you perform in sequence? To answer, move the actions from the list of actions to the answer area and arrange them in the correct order.
Select and Place:
Here is a quick overview of the steps:
Step 1: Register an application in Azure AD for the backend web service Register an application (backend-app) in Azure AD to represent the API.
Step 2: Set the App ID URI for the backend service application registration When the application is created (step 1) select Expose an API and click on Save and continue to create an Application ID URI.
Step 3: Defend the scopes in the backend web service application registration In the Add a scope page, create a new scope supported by the API. (e.g., Read) then click on Add scope to create the scope. Repeat this step to add all scopes supported by your API.
Step 4: Register an application in Azure AD for E-invoicing. Step 4.1 Register another application in Azure AD to represent a client application Step 4.2 Now that you have registered two applications to represent the API and the Developer Console, you need to grant permissions to allow the client-app to call the backend-app.
Scenario: Secure access to the backend web service by using Azure AD E-invoicing will have internal logic that will dynamically identify whether the user should be allowed to call the backend API.
You have a single-page application (SPA) named TodoListSPA and a server-based web app named TodoListService. The permissions for the TodoList SPA API are configured as shown in the TodoList SPA exhibit. (Click the TodoListSPA tab.)
You need to ensure that TodoListService can access a Microsoft OneDrive file of the signed-in user. The solution must use the principle of least privilege. Which permission should to grant?
A. the Sites.Read.All delegated permission for TodoListService B. the Sites.Read.All delegated permission for TodoListSpa C. the Sites.Read.All application permission for TodoListSPA D. the Sites.Read.All application permission for TodoListService
Correct Answer: A
A client application gains access to a resource server by declaring permission requests. Two types are available: “Delegated” permissions, which specify scope-based access using delegated authorization from the signed-in resource owner, are presented to the resource at run-time as “scp” claims in the client\’s access token. “Application” permissions, which specify role-based access using the client application\’s credentials/identity, are presented to the resource at runtime as “roles” claims in the client\’s access token.
You plan to deploy a SharePoint Framework (SPFx) solution to the tenant app catalog. Which attribute should you configure in the package-solution.json file to ensure that the solution is available immediately to all site collections?
A. skipFeatureDeployment B. zippedPackage C. ClientSideComponentId D. isDomainIsolated
Correct Answer: A
You can configure your SharePoint Framework components to be immediately available across the tenant when the solution package is installed to the tenant app catalog. This can be configured by using the skipFeatureDeployment attribute in the package-solution.json file.
What are two possible URIs that you can use to configure the content administration user interface? Each correct answer present a complete solution. NOTE: Each correct selection is worth one point.
The perfect Microsoft Power Platform App Maker study materials can help you prepare well for the Microsoft PL-100 exam. Pass4itSure introduces new PL-100 dumps with powerful questions and answers for you to prepare.
The PL-100 dumps are the perfect study material to help you get through. Available from this page: Https://www.pass4itsure.com/pl-100.html 206+ Q&A PL-100 perfect study Materials.
Can you summarize the Microsoft PL-100 exam?
Microsoft PL-100 exam is also known as the Microsoft Power Platform App Maker exam. The PL-100 exam lasts two hours. There are more than 50 questions, and you need at least 700 out of 1000 points to pass the exam. There are some case studies and questions with single and multiple choices. If you pass this certification exam, you may qualify for ACE University credit and will be certified by Microsoft Certified: Power Platform App Maker Associate.
How do I pass the PL-100 exam? (PL-100 question answers)?
New PL-100 dumps (Pass4itSure)will help you pass the PL-100 exam successfully!
Are you looking for the best PL-100 dumps study materials to prepare?
Pass4itSure has new PL-100 dumps with the appropriate questions and answers for you to prepare.
Or read PL-100 Microsoft Power Platform App Maker exam questions 1-13 below.
If you’re satisfied, head to the Pass4itSure website to get the full PL-100 dump as your learning material for the Microsoft Power Platform App Maker exam.
PL-100 free dumps Microsoft Power Platform App Maker exam questions 1-13:
1 You have an unmanaged solution, for which you have created multiple apps. You are required to move the apps to a different environment. The environment requires that the solution allows for components to be added, amended, renewed, removed, deleted, or tested.
You need to use the correct solution type. You make use of a Managed solution. Does the action achieve your objective?
A. Yes, it does B. No, it does not
Correct Answer: B
Explanation: A managed solution is a finalized solution that can be distributed and installed. They are created by exporting an unmanaged solution by setting restrictions to prevent any further customizations. The whole point of Managed is locking down the Component states so they cannot be edited. Deleting the Managed Solution will remove all its customisations as well as data contained. Managed Solutions become read only once deployed so they cannot be manipulated.
2. You create a canvas app. A user is not able to determine which field currently has focus. You run App checker to identify errors. You need to verify that the focused border thickness is set to a value greater than zero. Which section of the App checker results should you check?
A. Rules B. Performance C. Accessibility D. Runtime
Correct Answer: C
The Accessibility checker classifies each issue as an error, a warning, or a tip based on the issue\\’s severity.
Issues include: Focus isn\’t showing When the FocusBorderThickness of a control is set to 0. It is good practice to ensure a proper color-contrast ratio between the focus border and the control itself so it\’s clearly visible.
3. You have been tasked with designing a model-driven app. The app must be configured to permit so that users are able to generate and modify a list of current accounts.
You want to make sure that a list of all active accounts is displayed. You need to make use of a suitable user interface component. You use the Display form control. Does the action achieve your objective?
4. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You are developing a model-driven app that uses a Common Data Service database. App users will have a variety of different security roles.
Development and testing must be performed using production data. Multiple testers must be used at each testing stage. You need to provision and configure new environments for development and testing.
Solution: 1. Provision sandbox environments named S1 and S2. 2. Copy the production environment to both S1 and S2.3. Use S1 for development and S2 for testing. Does the solution meet the goal?
A. Yes B. No
Correct Answer: A
A sandbox environment is any non-production environment of Microsoft Dataverse. Isolated from production, a sandbox environment is a place to safely develop and test application changes with low risk.
5. You need to create an app for a client\’s janitors, who will only access the app via their mobile phones. The app must connect directly to a Microsoft Excel workbook to track cleaning tasks. Also, the janitors should have the ability to check completed tasks off on a checklist. Which of the following actions should you take?
A. You should consider creating a canvas app. B. You should consider creating a model-driven app. C. You should consider creating an embedded canvas app. D. You should consider creating a portal app.
6. You are employed as an app maker. You are currently creating a new canvas app. App users will include users who have diminished or no sight. You are identifying methods that will hide content from seeing users and show them to screen reader users. Which of the following methods are valid? (Choose all that apply.)
A. Configure color and related properties as transparent. B. Set X, Y, or both properties for the control to be on-screen. C. Set the width and height to 1. D. Set the size to 10.
7. HOTSPOT You need to resolve the issue for User1. What should you use? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Hot Area:
Correct Answer:
Box 1: Power Apps mobile app Scenario:
1. User1 often works in a warehouse that does not have internet connectivity. 2. User1 needs to edit an existing status report and submit a new status report. 3. The app must be able to run both online and offline. If the mobile device on which the app runs is connected to the internet, the app must immediately submit the status report.
You can build offline capabilities in your PowerApps app so your app users can access some data or save some data even when they don\’t have an internet connection.
Box 2: Connector Scenario: Azure SQL Database is used to store other data Use the SQL Server connector to connect to SQL Server, in either Azure or an on-premises database, so that you can manage your data with create, read, update, and delete operations.
8. HOTSPOT A company uses a model-driven app. You create a Power BI sales report. The executive of the company wants all users to see tiles from the report in the model-driven app. You need to ensure all users can see the tiles. What should you do? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. Hot Area:
Correct Answer:
Box 1: Power Platform Environment settings Before users can embed Power BI visualizations on personal dashboards, the organization-wide setting must be enabled. 1. In the Power Platform admin center, select an environment. 2. Select Settings > Product > Features. 3. Under Embedded content set Power BI visualization embedding to On to enable or Off to disable. 4. Select Save.
Box 2: Create a personal dashboard You can embed Power BI tiles on your personal dashboard. 1. Open your app and go to Dashboards. 2. Select an existing personal dashboard or select New to create one. 3. On the dashboard, select an area where you want the tile to appear and then select Power BI Tile on the toolbar. 4. Add a new Power BI tile. 5. In the Power BI Tile dialog, select the workspace and then select the Power BI tile that you want to display on your dashboard. Select Enable for mobile if you want to make the tile available for Dynamics 365 for tablets and Dynamics 365 for phones. 6. Select another area of the dashboard and repeat this step to add another Power BI tile, or another component, such as a chart or list, to your dashboard. 7. Select Save to save your dashboard.
Box 3: Share report and share dashboard. To share your personal dashboard that contains Power BI visualizations you must configure sharing in both Dataverse and Power BI, and the user or group must have the same credentials and appropriate level of access to both services. To share your personal dashboard in your app, go to Dashboards. In the list of dashboards, select the personal dashboard you want, and then select SHARE DASHBOARD.
9. You have been tasked with building a canvas app that allows users to track time on mobile devices. You should add a Sign-in screen, a screen to record the user\’s time entries for the week, and a screen to amend the user\’s recent time records.
Users will be issued ID cards that include the user\’s name and a recent picture, as well as a QR code that will include the user\’s employee number. You want to make sure that the app shows the user\’s photo upon scanning their ID cards. You add Image control to the app. Does the action achieve your objective?
10. You are using Test Studio to test a Power Apps canvas app. You need to ensure that the app conforms to several use cases. What should you do first?
A. Save the app to the cloud. B. Create test cases for each requirement. C. Save the app to your computer. D. Create a test suite. E. Record test cases for each requirement.
Correct Answer: D
Create a test suite. By default, a test suite and test case are created for you in Test Studio. Test suites are used to organize your test cases.
11. After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear on the review screen. A company has locations in multiple countries and regions across four continents.
The company stores the total amount of each order in the local currency of the country/region where the customer is located. The company stores the applicable exchange rates in a custom US dollars (USD) exchange rate table.
You need to create a visualization that displays the total amount of orders by country/region in USD. Proposed solution: Create a model-driven chart on the country/region table that aggregates the total amount of the orders by country/region. Does the solution meet the goal?
A. Yes B. No Correct Answer: B
Instead, use a calculated field. Need to calculate the exchange rate in USD. Calculated columns are calculated in real-time when they are retrieved.
12. In a Common Data Service database, you create a canvas app and a custom entity. The app also reads data from the Account entity in the Common Data Service database. Entity access permissions will be controlled by the Common Data Service User security role. You create a Common Data Service solution. You need to replicate the changes to a new Common Data Service database.
Which two components should you include with the canvas app? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.
A. Custom entity B. Account entity C. Common Data Service User security role D. Sitemap
Correct Answer: BC
13. DRAG DROP You need to ensure that the app can support the needs of User2 and User3, and meets the production deployment requirements. Which tools should you use? To answer, select the appropriate tool in the answer area. NOTE: Each correct selection is worth one point.
Select and Place:
Box 1: App Checker Scenario: Several sales representatives have accessibility restrictions. User2 is visually impaired and cannot see images. User3 is unable to use a mouse. Users who have vision, hearing, or other impairments can use your canvas app more easily and successfully if you consider accessibility as you design how the app looks and behaves. If you\\’re not sure how to make your app more accessible, you can run the AppChecker Accessibility checker in Power Apps Studio.
Box 2: Solution Checker Scenario: Before deploying the app to production, you must ensure that the app conforms to Microsoft accessibility and performance guidelines. Use a solution checker to validate your model-driven apps in Power Apps.
The latest AI-102 dumps have been updated to ensure that it is accurate and effective, and can help you complete the preparation for the Microsoft AI-102 exam.
The Pass4itSure AI-102 dumps are available to help you prepare >> https://www.pass4itsure.com/ai-102.html with 114 real exercises questions (PDF or VCE mode), updated on Jul 27, 2022.
AI-102: What Do I Need To Pay Extra Attention To In Designing And Implementing A Microsoft Azure AI Solution (beta)?
Artificial intelligence (AI) has played an important role in transforming the way businesses operate. It is also becoming more and more popular with the public. The AI-102 exam really falls into this category.
If you are preparing for the Microsoft AI-102 exam, you need to pay extra attention to what is mentioned below.
Full name of the exam: Designing and Implementing a Microsoft Azure AI Solution (beta) Abbreviation: AI-102 Passing Score: 700 Languages: English, Japanese, Chinese (Simplified), Korean, German, French, Spanish, Portuguese (Brazil), Arabic (Saudi Arabia), Russian, Chinese (Traditional), Italian, Indonesian (Indonesia) Skill:
Plan and manage an Azure Cognitive Services solution
Implement Computer Vision solutions
Implement natural language processing solutions
Implement knowledge mining solutions
Implement conversational AI solutions
Official Learning Resources:
Prepare for AI engineering
Provision and manage Azure Cognitive Services
Process and translate the text with Azure Cognitive Services
Process and Translate Speech with Azure Cognitive Speech Services
Create a Language Understanding solution
Build a question-answering solution
Create conversational AI solutions
Create computer vision solutions with Azure Cognitive Services
Extract text from images and documents
Implement knowledge mining with Azure Cognitive Search
Notice! The exam will be updated on August 2, 2022, which is tomorrow. You need to keep an eye on the exam policy at all times!
How Do I Prepare For The AI-102 Exam?
It is now easier to prepare for the AI-102 exam using AI-102 dumps.
Pass4itSure AI-102 dumps are a great choice for you. It provides you with the latest practice questions that meet the content of the Designing and Implementing a Microsoft Azure AI Solution (beta) exam to help you practice and improve your exam capabilities.
AI-102 Free Dumps Questions And Answers To Prepare You For The Exam:
AI-102 exam dumps questions are available online and are valuable for your exam study.
Q- 1
DRAG DROP You are building a retail chatbot that will use a QnA Maker service. You upload an internal support document to train the model. The document contains the following question: “What is your warranty period?”
Users report that the chatbot returns the default QnA Maker answer when they ask the following question: “How long is the warranty coverage?” The chatbot returns the correct answer when the users ask the following question: \\’What is your warranty period?” Both questions should return the same answer.
You need to increase the accuracy of the chatbot responses. Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. (Choose three.)
Select and Place:
Correct Answer:
Step 1: Add alternative phrasing to the question and answer (QnA) pair. Add alternate questions to an existing QnA pair to improve the likelihood of a match to a user query. Step 2: Retrain the model. Periodically select Save and train after making edits to avoid losing changes. Step 3: Republish the model
Note: A knowledge base consists of question and answer (QnA) pairs. Each pair has one answer and a pair contains all the information associated with that answer.
DRAG DROP You are developing a photo application that will find photos of a person based on a sample image by using the Face API. You need to create a POST request to find the photos.
How should you complete the request? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point. Select and Place:
Box 1: detect Face – Detect With Url: Detect human faces in an image, return face rectangles, and optionally with faceIds, landmarks, and attributes. POST {Endpoint}/face/v1.0/detect
Box 2: matchPerson Find similar has two working modes, “matchPerson” and “matchFace”. “matchPerson” is the default mode that it tries to find faces of the same person as possible by using internal same-person thresholds. It is useful to find a known person\\’s other photos. Note that an empty list will be returned if no faces pass the internal thresholds. “matchFace” mode ignores same-person thresholds and returns ranked similar faces anyway, even the similarity is low. It can be used in the cases like searching celebrity-looking faces.
You have the following C# method for creating Azure Cognitive Services resources programmatically.
You need to call the method to create a free Azure resource in the West US Azure region. The resource will be used to generate captions of images automatically. Which code should you use?
A. create_resource(client, “res1”, “ComputerVision”, “F0”, “westus”) B. create_resource(client, “res1”, “CustomVision.Prediction”, “F0”, “westus”) C. create_resource(client, “res1”, “ComputerVision”, “S0”, “westus”) D. create_resource(client, “res1”, “CustomVision.Prediction”, “S0”, “westus”)
Correct Answer: B
Many of the Cognitive Services have a free tier you can use to try the service. To use the free tier, use F0 as the SKU for your resource. There are two tiers of keys for the Custom Vision service. You can sign up for a F0 (free) or S0 (standard) subscription through the Azure portal.
Incorrect Answers: A: There is no free tier (F0) for ComputerVision.
HOTSPOT You need to create a new resource that will be used to perform sentiment analysis and optical character recognition (OCR). The solution must meet the following requirements:
Use a single key and endpoint to access multiple services. Consolidate billing for future services that you might use. Support the use of Computer Vision in the future. How should you complete the HTTP request to create the new resource? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. Hot Area:
Correct Answer:
Box 1: PUT Sample Request: PUT https://management.azure.com/subscriptions/00000000-0000-0000-0000-000000000000/resourceGroups/test-rg/providers/Microsoft.DeviceUpdate/accounts/contoso?api-version=2020-03-01-preview
Incorrect Answers: PATCH is for updates.
Box 2: CognitiveServices Microsoft Azure Cognitive Services provide us to use its pre-trained models for various Business Problems related to Machine Learning.
List of Different Services are: Decision Language (includes sentiment analysis) Speech Vision (includes OCR) Web Search
HOTSPOT You are planning the product creation project. You need to build the REST endpoint to create the multilingual product descriptions. How should you complete the URI? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point. Hot Area:
Box 1: api.cognitive.microsofttranslator.com Translator 3.0: Translate. Send a POST request to: https://api.cognitive.microsofttranslator.com/translate?api-version=3.0 Box 2: /translate Reference: https://docs.microsoft.com/en-us/azure/cognitiveservices/translator/reference/v3-0-translate
Q- 6
HOTSPOT You are building a chatbot by using the Microsoft Bot Framework Composer.
You have the dialog design shown in the following exhibit. For each of the following statements, select Yes if the statement is true. Otherwise, select No. NOTE: Each correct selection is worth one point.
Hot Area:
Box 1: No User. name is a property. Box 2: Yes Box 3: Yes The coalesce() function evaluates a list of expressions and returns the first non-null (or nonempty for string) expression.
HOTSPOT You develop a test method to verify the results retrieved from a call to the Computer Vision API. The call is used to analyze the existence of company logos in images. The call returns a collection of brands named brands. You have the following code segment.
Box 1: Yes Box 2: Yes If several logs are detected, or the logo image and the stylized brand name are detected as two separate logos, it starts numbering them from the bottom-left corner. Box 3: No
HOTSPOT You are creating an enrichment pipeline that will use Azure Cognitive Search. The knowledge store contains unstructured JSON data and scanned PDF documents that contain text. Which projection type should you use for each data type? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.
Hot Area:
Correct Answer:
Box 1: Object projection Object projections are JSON representations of the enrichment tree that can be sourced from any node. Box 2: File projection File projections are similar to object projections and only act on the normalized_images collection.
You develop an application to identify species of flowers by training a Custom Vision model. You receive images of new flower species. You need to add the new images to the classifier. Solution: You add the new images and labels to the existing model. You retrain the model and then publish the model. Does this meet the goal?
A. Yes B. No
Correct Answer: A
The model needs to be extended and retrained.
Q- 10
You develop an application to identify species of flowers by training a Custom Vision model. You receive images of new flower species. You need to add the new images to the classifier. Solution: You create a new model, and then upload the new images and labels. Does this meet the goal?
A. Yes B. No
Correct Answer: B
The model needs to be extended and retrained.
Q- 11
You build a language model by using a Language Understanding service. The language model is used to search for information on a contact list by using an intent named FindContact.
A conversational expert provides you with the following list of phrases to use for training. Find contacts in London. Who do I know in Seattle? Search for contacts in Ukraine. You need to implement the phrase list in Language Understanding. Solution: You create a new pattern in the FindContact intent. Does this meet the goal?
A. Yes B. No
Correct Answer: B
Instead, use a new intent for location.
Note: An intent represents a task or action the user wants to perform. It is a purpose or goal expressed in a user\\’sutterance. Define a set of intents that corresponds to actions users want to take in your application.
You need to build a chatbot that meets the following requirements: Supports chit-chat, knowledge base, and multilingual models Perform sentiment analysis on user messages Selects the best language model automatically
What should you integrate into the chatbot?
A. QnA Maker, Language Understanding, and Dispatch B. Translator, Speech, and Dispatch C. Language Understanding, Text Analytics, and QnA Maker D. Text Analytics, Translator, and Dispatch
Correct Answer: C
Language Understanding: An AI service that allows users to interact with your applications, bots, and IoT devices by using natural language.
QnA Maker is a cloud-based Natural Language Processing (NLP) service that allows you to create a natural conversational layer over your data. It is used to find the most appropriate answer for any input from your custom knowledge base (KB) of information.
Text Analytics: my insights in unstructured text using natural language processing (NLP)–no machine learning expertise required. Gain a deeper understanding of customer opinions with sentiment analysis. The Language Detection feature of the Azure Text Analytics, REST API evaluates text input
Incorrect Answers: A, B, D: Dispatch uses sample utterances for each of your bot\\’s different tasks (LUIS, QnA Maker, or custom), and builds a model that can be used to properly route your user\\’s request to the right task, even across multiple bots.
You use the Custom Vision service to build a classifier. After training is complete, you need to evaluate the classifier. Which two metrics are available for review? Each correct answer presents a complete solution. (Choose two.)
NOTE: Each correct selection is worth one point.
A. recall B. F-score C. weighted accuracy D. precision E. area under the curve (AUC)
Download AI-102 dumps [Genuine] >> https://www.pass4itsure.com/ai-102.html to prepare for the Designing and Implementing a Microsoft Azure AI Solution (beta) exam with ease.
